| The TE210P supports E1, T1, and J1 environments and is selectable on
a per-card or per-port basis. This feature enables signaling
translation between E1, T1, J1 equipment and allows inexpensive T1/J1
channel banks to connect with E1 circuits. Because the TE210P improves
I/O speed by up to 10 times, the result is reduced CPU usage and
increased card density per server.
Digium has
designed the TE210P to be fully compatible with existing software
applications and it is fully integrated with the Asterisk Open Source
PBX/IVR platform. Also, the open source driver supports an API
interface for custom application development. With the combination of
Digium Hardware and Asterisk software, numerous combinations of
telephony configurations are possible. From the traditional PBX to VoIP
Gateways, Digium solutions are paving the way for a new generation of
worldwide communications.
The TE210P supports
industry standard telephony and data protocols, including Primary Rate
ISDN (both N. American and Standard Euro) protocol families for voice,
PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and
trunk-side interfaces are supported, also included are advanced call
features.
The TE210P supports a 3.3v PCI slot only
- typically available on newer motherboards and in 64-bit PCI bus
architectures. The TE205P is for use only with a 5.0 volt PCI slot. |
