Sangoma A101E - PCI Express
first affordable single port T1/E1/J1 card with available
Telco-grade hardware echo cancellation. It's designed for optimum voice
support for smaller systems.
The A101 is part of Sangoma's family of Advanced Flexible
Telecommunications hardware product line - it uses the same
high-performance PCI or PCI Express interface that is providing
superior performance in critical systems all over the world. The A101
supports up to 2.048 Mbps of full duplex data through-put or up to 30
voice calls over a single T1, E1, or J1 line.
With Sangoma cards, you can always take advantage of hardware and
software improvements, as soon as they become available. The A101, like
all cards in Sangoma's AFT family, is field upgradeable with
crash-proof firmware. Choose the Sangoma A101D and A101DE cards with
Octasic's DSP hardware and certified algorithms to achieve
carrier-grade echo cancellation and Voice Quality Enhancement functions
on your open source or even proprietary telephone system.
Sangoma A101E - Operating
Linux (all versions, releases and distributions from 1.0
Sangoma A101E - Voice
Asterisk™, Yate™, Open PBX/IVR, FreeSWITCH™, TrixBox™, as well as
Sangoma A101E - AFT card (PCI)
Digital Signal Processor
Hardware echo canceller
Hardware echo canceller
Sangoma A101E - Line protocols
FCC Part 15 Class A, FCC Part 68, CISPR 22, EN 55022, Class
A, CIPSR 24, AFIC-2016, IEC 60950.
Technical certifications in Russia, Malaysia, and
Sangoma A101E - Higher
IP/PX over Frame Relay/PPP/HDLC/X.25, X.25 over Frame Relay (Annex G),
BSC over X.25 (D.T. and TOP), SNA over X.25, PPPoE, PPPoA, IP over ATM.
Sangoma A101E - Diagnostic
WANPIPEMON, SNMP, System logs
Sangoma A101E - T1/E1
RED: Telco Red Alarm Condition.
OOF: Out of Frame.
LOS: Receive Loss of Signal.
AIS: Alarm Indication Signal.
RAI: Remote Alarm Indication (Yellow Alarm).
Sangoma A101E - RJ
45 E1/T1 Pinouts
Sangoma A101E - Certification
FCC Part 15 Class A, FCC Part 68, CISPR 22, EN 55022 Class
A, CIPSR 24, AFIC-S016, IEC 60950.
Technical certifications in Russia, Malaysia and
Sangoma A101E - Production
Sangoma A101E - Warranty
Lifetime warranty on parts and labour.
PLUS 30-day “no questions asked” return policy.
Sangoma A101E - PCI Express Specifications
- Technical Specifications
One T1/E1 port with optimum PCI Express or PCI interface
for high performance voice and data applications.
Line decoding: HDB3, AMI, B8ZS.
Framing: CRC-4, Non CRC4, ESF, SF, D4. Also compatible with
Support for Asterisk™, Yate™, and FreeSWITCH™ PBX/IVR
Projects, as well as other open source and proprietary
PBX/Switch/IVR/VoIP gateway applications.
All of Sangoma’s AFT products use the same base PCI
interface card and the same professionally engineered firmware on the
same family of Field Upgradeable Gate Arrays.
Fully compatible with all commercially available
motherboards—proper PCI-standard interrupt sharing without manual
A101E and A101DE PCI Express: 1 Lane PCI Express bus.
Dimensions: 2U Form factor: 120 mm x 55 mm for use in
Includes high quality, tested RJ45 cables and short 2U
mounting clips for installation in 2U rack mount servers.
Power: 800 mA peak, operational 300 mA max at +3.3 V or 5
Temperature range: 0 - 50 °C.
Autosense compatibility with 5 V and 3.3 V PCI busses.
Intelligent hardware: Downloadable FPGA programming with
multiple operating modes. Add new features related to voice and/or data
when they become available.
32-bit bus master DMA data exchanges across PCI interface
at 132 Mbytes/sec for minimum host processor intervention.
Ring buffer DMA handling for minimum host intervention and
guaranteed data integrity on high volume systems.
Supports Robbed Bit Channel Associated Signaling (CAS) and
T1/E1 and fractional T1/E1, multiple channel HDLC per line
for mixed data/TDM voice applications.
Optimized per channel DMA streams and hardware-level HDLC
handling unload the host CPU.
Use raw bitstream interfaces to support arbitrary
non-standard line protocols, such as non-byte aligned monosynch or
WANPIPE® routing stack is completely independent of TDM
voice application for total system reliability.
WANPIPE® supports certified, field-tested, and reliable
Frame Relay, PPP, HDLC, and X.25.
daughterboard on the A101D
G.168–2002 echo cancellation in hardware.
1024 taps/128 ms tail per channel on all channel densities.
DTMF decoding and tone recognition.
Voice quality enhancement: Octasic music protection,
acoustic echo control, and adaptive noise reduction.