IMPORTANT NOTICE: The entire Telephony Depot team will be in intermittent training sessions this week (9/15 to 9/19). Tuesday and Thursday our office will close for the day at 12:30 PM EST. Please expect order processing delays during this period.
The TE122P has been discontinued by the manufacturer. The replacement product is the TE132.
Used in conjunction with Asterisk®, the TE122 can be used to deliver a
wide range of PBX and IVR services to the network or handset including
Voicemail, Call Conferencing, Three-way Calling, and VoIP Gateways.
The TE122 is a single span, selectable T1 (24-channel), E1
(32-channel), or J1 (24-channel) card. The card utilizes Digium's
VoiceBus™ technology. VoiceBus technology allows the TE122 to use an
industry standard bus-mastering PCI interface, as found in millions of
PCs worldwide, to maximize system compatibility and eliminate system
conflicts. Improving upon the prior TE120P which does not offer
expansion capabilities, the TE122 may be combined with Digium's VPMOCT032 echo cancellation module to deliver 128ms of echo
cancellation across 30 channels in E1 mode or 24 channels in T1 mode.
Bundled with the VPMOCT032, the product SKU is TE122B.
The TE122 supports both voice and data modes on its single span. For
example, the card can support 12 channels dedicated to voice, routed
directly to the Asterisk Open Source PBX, and 12 to data, handled by
the underlying Linux operating system, thus eliminating the need for an
external router. The TE122 works in both 3.3V and 5V PCI slots by auto
detecting the slot's voltage.
By utilizing our TDMoE (TDM over Ethernet) technology, an exclusive
Digium process, you can easily connect multiple PCs equipped with the
TE122 and achieve voice quality on par with single PBX implementations.
Scalability for this product is derived from adding multiple TE122
cards to each individual PC. Add additional cards as you need them for
your expanding applications.
The TE122 supports industry standard telephony and data protocols,
including both RBS and Primary Rate ISDN (PRI) protocol families for
voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives
both line-side and trunk-side interfaces, including call features.
Port T1/E1 PRI
1 Digital Interface Port Supports both Voice and Data
Selectable T1, E1, or J1 Mode
Half-length, Low Profile, Digital Card
TE122 for use only with a 3.3V or 5.0V PCI 2.2 compliant
slot. - Bundled with VPMOCT032 Echo Cancellation Module as TE122B
TE121 for use only with PCI-Express 1.0 compliant slot. -
Bundled with VPMOCT032 Echo Cancellation Module as TE121B