C730

Mediatrix 1204

Discontinued
$390.75
Quantity Pricing:
$390.75

List Price: $580.00

/1204_zoom.pjpeg

Mediatrix 1204

The 1204 has been discontinued by the manufacturer. The replacement product is the C730.
The Mediatrix 1204 connects up to 4 FXO trunks to an IP Ethernet access
The Mediatrix 1204 provides PSTN access for various VoIP endpoints such as IP phones, FXS devices, softphones and IP-based PBX and Key Systems. It is an efficient solution to maintain local PSTN breakout in remote locations that are converted to IP. The Mediatrix 1204 provides a gateway to the PSTN for IP-based PBX and Key Systems. Thereby, it allows the deployment of VoIP Remote Line Extension and Branch Office Connectivity solutions without sacrificing any local PSTN access points.

By connecting CO lines from selected sites to a VoIP network, the Mediatrix 1204 enables service providers and enterprises to use a VoIP connection between predetermined local networks. When used in conjunction with Mediatrix® Dial IPCS communication server, routing schemes and calling rights can be programmed in order to optimize the use of resources and minimize long distance fees.

As all other Mediatrix devices, the 1204 provides web interface, giving users a convenient access to the unit for initial set-up. The devices can also auto-provision by fetching their encrypted configuration from a TFTP or HTTP server making installation secure and transparent to the end-users. To further facilitate deployments, factory loaded configurations are possible.

Mediatrix 1204 Key Benefits:

Voice Functionalities
  • Carrier-grade voice quality

Ease of configuration and management
  • Automatic firmware and configuration file download
  • SNMP and web management
  • TFTP or HTTP auto-provisioning

Security
  • Support for SNMPv3
  • Encrypted configuration files support
  • HTTP Digest authentication

Functional Description

Mediatrix 1204 Specifications

Display

  • Power LED
  • LAN activity LED
  • Activity/In-Use LED indication on FXO ports
  • Ready LED

Connectors
  • 4 RJ-11 connectors, analog line (FXO) interface
  • 1 RJ-45 connector, 10/100 BaseT Ethernet access (autosense: up to 100 Mbits)

Power
  • Integrated universal power supply input that can accept 100 to 240 Vac, 50/60 Hz input.
  • Seamless switch over period if the client UPS detects a power loss and activates within 10 ms.

Casing / Mechanical
Casing: Desktop (Plastic ABS UL94 V0), stackable

Product Architecture Details
  • Supports four concurrent communications
  • DSP-based DTMF detection, generation and synthesis
  • DSP-based echo cancellation (G.168)
  • DSP-based fax/data relay
  • Embedded operating system with 32-bit real-time multitasking Kernel
  • Embedded IPv4 TCP/IP stack with configurable QoS implemented by: a) ToS byte at Network layer 3 b) 802.1p at Data Link layer 2
  • Network parameters assigned via DHCP

Real Time Fax Router Technical Specifications
Automatic selection between voice and fax

Protocols
Group 3 Fax Clear channel (G.711), G.726 or T.38 Real Time Fax Over IP protocol Stack

Fax Data Compression
MH

Fax Transmission Protocols
Up to 14.4 kbps

PSTN Interface (FXO)
  • Programmable line interface
  • Programmable loss plan
  • Built-in transient/surge protection
  • 4 RJ-11 connectors
  • Detection of Selective Ring

Trunk Type
Loop Start/Ground Start (software configurable)

Ring Detection
22 VRMS min, 15 Hz to 68 Hz (configurable by parameter)

Nominal Impedance
AC and DC impedance software configurable to support most countries worldwide.

Ringer Equivalence
0.8 REN (with Caller ID)
0.2 REN (without Caller ID)

Miscellaneous Audio Specifications
  • Software input and output level adjustable within the range -36 dB to +12 dB.
  • Software-adjustable dynamic and static jitter buffer protection.
  • DSP-based echo control device.
  • Silence detection/suppression level software adjustable.

DTMF Tone Detection

16 Digit DTMF Decoding
0 to 9, *, #, A, B, C, D

Permitted Amplitude Tilt
High frequency can be +2 dB to -8 dB relative to low frequency

Dynamic Range
-35 dBm to +3 dBm per tone

Frequency Accept
± 1.5% of nominal frequencies

Minimum Tone Duration
40 ms, can be increased with software configuration

Interdigit Timing
Detects like digits with a 40 ms interdigit delay

DTMF Tone Generation

Per Frequency Nominal
-6 dBm to -4 dBm

Frequency Deviation
Less than 1%

Power Consumption
Idle Mode; 85Vac I = 81 mA P = 3.1 W
Idle Mode; 265Vac I = 44 mA P = 3.2 W
LoopBack on 4 Ports + Ping; 85Vac I = 115 mA P = 4.96 W
LoopBack on 4 Ports + Ping; 265Vac I = 64 mA P = 5.1 W

Operating Environment
Operating Temperature: 0°C to 40°C
Humidity: up to 85 %, noncondensing
Storage:  -20°C to +70°C

Dimensions and Weight
Without Rack Mounting Tabs
4.5 cm x 22 cm x 18 cm – 1.8 x 8.8 x 7.2 in. (approx.)
With Rack Mounting Tabs
4.5 cm x 23 cm x 18 cm – 1.8 x 9.2 x 7.2 in. (approx.)
With Rubber Feet
5.5 cm x 26 cm x 18 cm – 2.2 x 10.4 x 7.2 in. (approx.)
Weight
750 g (1.7 lb)

Mediatrix 1204 Resources